Basics · 3 min read · CONSIDER Medical · Updated
Oxygen Concentrators for Hyperbaric Chambers
Choose an oxygen concentrator for a hyperbaric chamber by purity, L/min flow, pressure compatibility and user count. Compare soft and hard-shell packages.
An oxygen concentrator for a hyperbaric chamber must match the chamber's pressure, breathing circuit, required oxygen purity, flow per user and supported user count. A chamber controls pressure; the concentrator supplies oxygen. Compare them as a complete system before buying or replacing equipment.
Why Oxygen Delivery Is Part of the System
Ambient air contains roughly 21% oxygen. Hyperbaric configurations pair increased pressure with a defined oxygen-delivery method, but that method may be an all-in-one concentrator, an integrated concentrator or another system specified for the chamber. Confirm delivered purity, flow, mask or headset arrangement and supported user count.
The All-In-One Design
Every CONSIDER soft chamber ships with an all-in-one machine that combines the air compressor and the oxygen concentrator in a single quiet, oil-free unit. It pressurizes the chamber and delivers up to 93% oxygen through a mask at the same time — no separate equipment to source or match. The COSL15 and COSE15 both include this unit.
Flow and Purity: What the Numbers Mean
| Spec | Typical value | What it means |
|---|---|---|
| Oxygen purity | up to 93% | How concentrated the oxygen you breathe is |
| Flow rate | 1 – 10 L/min adjustable | How much oxygen is delivered per minute |
| Operation | Oil-free, low-noise | Suitable for quiet home environments |
CONSIDER soft-chamber packages use up to 93% purity with adjustable flow up to 10 L/min, depending on model. For more than one user, confirm the total delivery architecture and the flow available to each breathing position rather than assuming a single flow figure is sufficient.
Match the Oxygen Package to the Chamber
| Chamber format | Oxygen package | Selection check |
|---|---|---|
| Portable soft chamber | Included all-in-one compressor and oxygen concentrator | Confirm the selected model's purity, adjustable flow, hose connections and breathing interface. |
| Single-person hard-shell | Model-specific integrated oxygen and control system | Confirm output at operating pressure, electrical supply and access for filter servicing. |
| Multiplace hard-shell | Configured delivery to each supported breathing position | Confirm the number of outlets, simultaneous users and flow available per user. |
Compare the portable lying and seated soft chamber packages, or plan shared-session capacity with multiplace hyperbaric chambers.
Concentrators in Hard-Shell Systems
Hard-shell single-person and multiplace systems use model-specific oxygen and control architectures rather than the same portable package supplied with soft chambers. The COHT20, for example, specifies an integrated oxygen concentrator of at least 93% ±3% at 10 L/min.
Can a Standard Home Oxygen Concentrator Be Connected?
Compatibility depends on the chamber's delivery circuit and the concentrator's specified output under the required conditions. A nominal 10 L/min label alone does not establish compatibility. Confirm operating pressure, delivered flow, purity, connectors, alarms and the approved breathing interface with the chamber supplier before substituting a unit.
What Should Be Confirmed in the Quotation?
- The chamber model, pressure rating and supported simultaneous user count
- Oxygen purity and flow available at each breathing position under operating conditions
- Included compressor or integrated air system, concentrator, masks or headsets, hoses and connectors
- Electrical supply, room ventilation, operating noise and service access
- Filter schedule, replacement parts, alarms and technical support
Caring for Your Concentrator
Keep the intake ventilated and free of dust, check filters on the schedule in the model manual, and watch for purity, flow, alarm or noise changes. Operating altitude, heat, humidity and blocked ventilation can affect performance, so confirm the installation environment with the supplier. See maintenance and care.
Part of Basics guides.
Have a Question About Your Project?
Our team can recommend the right chamber for your market, space and pressure.
